How to better charge the car in the hot summer?

Here are some tips for charging your car better on a hot summer day:

1. Choose the right charging time:

Try to avoid charging during the hottest hours of the day, such as at noon. 

Charging can be done early in the morning, late afternoon, or at night, when 

the temperature is relatively low, which helps to reduce the heat generation of

 the battery during charging.

2. Look for a shady charging location:

If possible, park your vehicle in a shaded area, such as an underground car park,

 garage, or a sheltered charging station. Avoid direct exposure of the vehicle to 

sunlight and reduce the operating temperature of the battery and charger in a 

high temperature environment.

3. Do not charge immediately after high temperatures:

If the vehicle is driven or parked in a hot environment for a period of time, wait

 for the battery temperature to decrease a little before charging to reduce the 

burden on the battery.

4. Avoid overcharging:

Try to use  AC charging piles , AC charging piles can be charged to 00%, when 

using DC charging piles, you should strictly follow the recommendations of

 the vehicle manufacturer, control the charging time and power, and avoid 

overcharging, because overcharging may cause the battery to overheat.

5. Check the charging equipment regularly:

Make sure the charging plug, cable, and charger are not signs of damage, 

aging, or overheating. If a problem is found, it should be replaced or

 repaired in time.

6. Keep your vehicle well dissipated:

Before charging, make sure that the vehicle's cooling system is working properly

 and that there are no debris blocking the heat dissipation outlets.

7. Keep an eye on battery status:

Through the vehicle's battery management system or related applications, the

 temperature and charging status of the battery can be monitored in order to 

detect anomalies in time.

Summary:

By following the above recommendations, you can better ensure the safety and

 efficiency of car charging and extend the life of the battery in the summer.

  The AC charging pile motherboard produced by Xincheng Technology has strengthened

 the safety module design on the basis of the new national standard, with multiple safety 

protections:Over-temperature protection, leakage protection, surge protection, short-circuit protection,

 grounding detection, relay adhesion detection, over-under-voltage protection, 

overload protection, etc., as detailed in the following figure:

The AC charging pile motherboard produced by Xincheng Technology attaches equal importance to safety and user experience, and can be automatically recovered in the event of overvoltage and undervoltage, and can be automatically protected by secondary overcurrent and overtemperature, and can be safely self-recovered for a limited number of times.

Choose the motherboard of the charging pile of Xincheng Technology, and the car dealer will not hesitate in the hot summer!